Cover Lens Glass Cutting Machine YRDJD2015.
Main Function
Suitable for Architectural and architectural processing glass products, Building decorative glass, Energy-saving glass doors, windows and accessories, Industrial glass, Art glass,New energy glass, and can realize all kinds of shapes one-time cutting . with high accuracy and working efficiency, and there is no technical requirement for the operator. It can realize one-time cutting of various shapes.
Technical Parameter
Cutting thickness: 0.15mm-5mm
Can cut glass below 20mm
Effective size of cut glass: 2000*1500mm
Whole machine weight:3150kg
Straight cutting tolerance: ±0.05mm
Cutting speed: 0-80 m/min (adjustable)
Power:4.5kw
Flatness of table surface: ±0.015mm
Configuration
Transmission system: X, Y, Z axis adopts servo motors imported from Taiwan
Oil supply mode: automatic oil injection device
Positioning device: mechanical positioning device
Mechanical configuration: The guide screw rods are all Taiwan Silver.
Countertop: Marble precision countertop, air flotation device
Pneumatic Components: SMC
Computer configuration: HP Industrial
Software
Glass Cutting Software (Shanghai Weihong) V10
Using professional glass cutting software, CAD drawing, you can cut rectangles and various graphics.
Pneumatic components
1. Air switch: Taiwan's Taian (with leakage protection function)
2. AC contactor: Taiwan Tai An
3. Button, indicator light, selector switch: Taiwan Shanhe
4. Switching power supply: Taiwan Mingwei
5. Relay: Omron Omron
6. Proportional valve: SMS Standard Modular System
7. Filter, solenoid valve: SMC
Technical Parameters
No. |
Item |
Specification |
1 |
Cutting Glass Size |
2000*1500mm |
2 |
Thickness of Glass |
0.15-5mm |
3 |
Cutting Tolerance |
±0.05mm(Straight line) |
4 |
Dimension |
2700*2100*1350mm |
5 |
Weight |
3150KG |
6 |
Power |
4.5kw |
7 |
Cutting Speed |
0-80m/min(Adjustable) |
8 |
Flatness of Table |
±0.015mm |
Main Configuration
No. |
Item |
Specification |
1 |
Drive system |
Taiwan Delta servo motor |
2 |
Mechanical |
Taiwan Hiwin |
3 |
Table |
Marble (with air flotation) |
4 |
Oil Supply Way |
Automatic |
5 |
Positioning Device |
Mechanical positioning |
6 |
Bearing |
Japan NSK |
7 |
Cutter Structure |
Cylinder |
Electric Element
No. |
Item |
Specification |
1 |
Pneumatic Element |
Japan SMC |
2 |
Electrical Element |
Taiwan Shanhe |
3 |
Relay |
Taiwan Taian |
4 |
Proportional Valve |
Japan SMC |
5 |
Filter |
Japan SMC |
6 |
Solenoid Valve |
Japan SMC |
7 |
Button |
Japan IDEC |
8 |
Indicator Light |
Japan IDEC |
9 |
Select Switch |
Japan IDEC |
10 |
Switch Power Supply |
Japan Omron |
11 |
A.C.Contactor |
Taiwan Taian |
12 |
Air Switch |
Taian(With leakage protection function) |
13 |
Computer |
ASUS |
Software(Taiwan Laford X1)
No. |
Function |
1 |
It can change the original point arbitrarily |
2 |
Optimize graphical layout automatically |
3 |
Origin correction function |
4 |
Typesetting function standard, pattern variety |
5 |
Typesetting and control on the same software, the operation is fast and convenient |
6 |
Multi-area cutting can automatically optimize the cutter path, and there are many optimization options |
7 |
Partition can be cut, this function can be directly edited without drawing |
8 |
Can realize the automatic conversion of blowing and inhaling |
9 |
Pause function during cutting |
Wearing parts list
No. |
Item |
1 |
Cutter Wheel |
2 |
Copper Head |
3 |
Bearing(NSK) |
4 |
Cutter Holder |
5 |
Pin |
6 |
Cylinder |
7 |
Synchronous Belt |
Additional list
No. |
Item |
1 |
1 PCS of Glass Breaking Table |
2 |
1 PCS of Copper Head |
3 |
1 PCS of Cutter Holder |
4 |
1 PCS of |
Requirement for buyer’s factory
No. |
Item |
Specification |
1 |
Voltage Pressure |
Three-phase 380V |
2 |
Air Pressure |
0.4-0.6Mpa dry air source (with Φ8mm air pipe) |
Our service
● GUARANTEE
1 year guarantee for whole machine from production date (except consumable parts) Within guarantee under normal use and maintenance, if something is wrong with the machine, you will get spare part for free.
● TECHNICAL SUPPORT
Technical support by phone, email, whatsapp and Skype. Friendly English manual and operation video CD disk. Engineer available to service machinery overseas. You will also get technical support and service all the lifetime.
● AFTER SALE SERVICES
Normal machine is properly adjusted before dispatch. You will be able to use the machine immediately after received machine. You will be able to get free training advice towards our machine in our factory.
FAQ
Q1 For offer the most suitable machine,how should i do ?
A1).Which kind of glass to cut? (such as Architectural and architectural processing glass products, Building decorative glass, Energy-saving glass doors, windows and accessories, Industrial glass, Art glass,New energy glass:.... ? )
2). For the cutting accuracy? Usually have ±0.025mm, ±0.05mm, ±0.1mm,±0.2mm, ±0.3mm, etc.
3). The working area you demand? (such as max dimension of material, width*length,500*600mm,600*800mm,1300*1100mm, 1500*1200mm, etc...
4). Do you want to cut &flat surface or round & edge grinding & washing?
After your tell us these,we will send you more information about the machine and price.
Q2.If we don’t know how to use the machine,can you teach us?
A: Yes,we will ,if you come to China,we will offer you free training until you can use machine freely. We have manual instruction and CD (Guiding Videos) for software Installation, operation and machine's using and maintenance. And if need our engineer to your country, that is no problem, but you need to bear some fee, like tickets and hotel and meal.
Q3.How about your after-sales service?
A: We offer you 24 hours service phone, wechat and whatsapp.
Q4.How about your guarantee period?
A: One year and during the time,if you have any questions ,we will solve it for free.
http://www.yinruimachine.com/